testing pipe
英 [ˈtestɪŋ paɪp]
美 [ˈtestɪŋ paɪp]
【化】取样管
双语例句
- Field Stress and Strain Testing on Damaged Pipe Segment in LuNing Oil Pipeline
鲁宁管道打孔盗油管段应力现场测试 - The utility model is suitable for testing the plastic pipe in the hydrostatic test and the blasting test.
本试验装置适用于静压试验和瞬间爆破试验检验塑料管材。 - Plug in power, connect the air source and testing pipe.
插上电源，接上气源，接通检测管。 - Experiments showed that ultrasonic testing method was suitable for the weld quality testing of PE pipe.
试验表明，超声检测方法适用于PE管热熔焊缝的焊接质量检测。 - PMFL has the advantage of last speed and quantification, this makes the meth-od have the broad, application foreground in the testing of steel pipe.
脉冲漏磁检测方法综合了漏磁检测和脉冲涡流检测的优点，具有快速、定量检测的特点，在管道等的缺陷检测中具有广阔的应用前景。 - It realized digital of nondestructive testing for spiral welded pipe.
实现了螺旋焊管无损检测的数字化。 - Life testing method for heat pipe
GB/T14813-1993热管寿命试验方法 - A Method about Testing Verticality of Pre-stressed Pipe Body
预应力管桩桩身垂直度检测的一种方法 - Dimension effect on low strain integrity testing of prestressed pipe piles
预应力管桩低应变反射波法检测时的尺寸效应研究 - The Preparation of Low Temperature Converter Used in NO_X Chemiluminescence Ultrasonic Flaw Testing of the Pipe Connection Fillet Welding of the Middle Temperature Converter
应用于NOx化学发光仪中低温转化剂的研制中变炉管座角焊缝的超声波探伤 - The best impelled current of the electromagnetic iron was determined by experiments, and magnetic induction intensity in electromagnetic acoustic transducer ( EMAT) testing steel pipe's defaults was calculated by ANSYS finite element software.
通过实验研究，确定了电磁超声传感器最佳励磁电流，利用ANSYS有限元软件，对用于钢管缺陷检测的电磁超声传感器的磁感应强度进行了计算，得到磁感应强度的分布规律。 - Application of pressure sensor in testing water pipe resistance coefficient
压力传感器在给水管道阻力系数测试中的应用 - FEM analysis and design of the magnetizer on external thread testing of drill pipe
钻杆外螺纹检测中磁化器的有限元分析与设计 - The experimental results verify that S4 is an effective method for simulating the rapid crack propagation in the pressure PE pipe and the critical pressure strength can be taken as a standard, of S4 to measure the pressure the testing pipe bears.
分析认为：S4是模拟聚乙烯压力管道的快速裂纹扩展的一种有效方法。S4的临界压强是衡量管道承受压力的一个标准。 - The main dimensionless parameters that influence the homogeneity of the fluid thermal boundary conditions are Peclet number, the wall to fluid thermal conductivity ratio, the heating/ cooling length radius ratio and the wall thickness radius ratio of testing pipe.
影响这种不均匀性的主要因素是Peclet数、管壁材料的相对导热系数、实验段相对加热长度及管壁相对厚度等无量纲参数。 - SOLUTION TO THE PROBLEM OF STEEL TUBE RUSTING IN ULTRASONIC FLAW DETECTION Ultrasonic Flaw Testing of the Pipe Connection Fillet Welding of the Middle Temperature Converter
钢管在超声波探伤中锈蚀的解决办法中变炉管座角焊缝的超声波探伤 - Ultrasonic Flaw Testing of the Pipe Connection Fillet Welding of the Middle Temperature Converter NDT of Fillet Welded Joints between Decentralized Downcomer and Drum of Boiler No.8 in Matou Power Plant
马头发电厂~8炉汽包分散降水管管座角焊缝的无损检测 - Discussion on ultrasonic testing of the pipe socket angle seam
浅谈管座角焊缝超声波探伤 - Infrared Non-destructive Testing of Pipe with Outer Defect and Character Direction Method of Defect Identification
管道外表缺陷红外无损检测和缺陷识别特征方向法 - Dynamic character of oil testing pipe shock absorber system under impact load was researched based on finite element analysis software ANSYS/ LS-DYNA.
基于有限元分析软件ANSYS/LS-DYNA研究冲击载荷下石油测试管柱减振系统的动力学性质。 - Wavelet transform has specific property for processing the signals of testing underground pipe, which can improve the precision of prospecting underground pipe effectively.
实例分析表明，小波方法在城市地下管线探测信号去除噪音分析处理方面具有优异性能，能有效提高探地雷达探测地下管线的精度。 - Numerical Analysis of Oil Testing Pipe Shock Absorber System under Different Structural Parameters
不同结构参数的石油测试管柱减振系统的数值模拟 - Strength testing of pipe lines
管线强度试验 - Research and apply of ANSYS on magnetic leakage testing of drilling pipe flaw
ANSYS在钻杆缺陷漏磁检测的应用研究 - In this paper, about technicology and techniques of the over pressure perforating, the principle and the structure of testing pipe string are introduced as well as the feasibility is shown by field examples.
介绍了过压射孔的工艺技术原理、管柱结构设计，并通过实例证明了其可行性。 - Through laboratory simulation tests, the procedure and instrument parameters of ultrasonic testing for pipe welds were educed and successfully applied to the high temperature detection of high pressure pipe welds in a certain power plant.
通过采用实验室模拟进行当量测试，确定了管道焊缝超声波探伤的工艺和仪器参数，并成功应用于某电厂高压导汽管焊缝高温状态的检测。 - Research and application of a new type separate layer water injection and testing pipe string
新型分层注水分层测试管柱研究及应用 - The Research of Real Time Testing of Steel Pipe Crackle
热轧钢管裂纹在线检测仪的研究 - A testing equipment of heat pipe was set up.
建立了一套测试热管传热性能的实验装置。 - Bimetallic corrosion behavior, occurred when grounding grid contacted with the buried pipelines, was studied using electrochemical testing and immersion experiments. The results showed that the galvanic effect was obvious. ( 4) Study on bimetallic corrosion testing of blow-off pipe of compressor outlet.
利用电化学测试和室内浸泡实验对接地网与管道接触时可能发生的电偶腐蚀行为进行研究，结果表明电偶腐蚀效应明显。（4）压缩机出口排污管的电偶腐蚀实验研究。